Probes And Senders

The Fuel Pressure Sensor inserts into any 1/8 or ¼ NPT fitting in a fuel tank. It detects differential pressure between 0 and 1.5 bars of press...

This probe is for 655, 301, 307, 303, 803 Length: 1.3" Diameter. .255" 7' Cale Probe is an active componet whe...

TSO'd UMA Ceramic Pressure Sender 5-50AB. T1EUMA050A-B

ALCOR 3-1/4 INCH CLAMP EGT/TIT PROBE WITH PLUG UNGROUNDED, .8 OHM, TYPE K Dimensions: 1X3.5X5.5

ALCOR 3-1/4 INCH CLAMP EGT/TIT PROBE WITH PLUG UNGROUNDED, .8 OHM, TYPE K Dimensions: 1X3.5X5.5

Piper 13-10017-501 PMA Fuel Sender Gasket is used with the 9812-0001-101, 9812-0002-101, 9812-0003-101 & 9812-0004-101 Fuel Sender Only. Dim...

Piper 13-10017-501 PMA Fuel Sender Gasket is used with the 9812-0001-101, 9812-0002-101, 9812-0003-101 & 9812-0004-101 Fuel Sender Only. Dim...

Gauge Range: 100 PSI # Terminals: 1 Note: Units with one terminal require the mount be grounded. Dimensions: .175X1.75X3.125

Ring Thermocouple (Type J for cylinder head temp). The I.D. of the ring hole is 4.3mm, O.D. is 8mm. 48" Lead. This can be fixed with #6 and #8 sc...

Gauge Range: 80 PSI # Terminals: 1 Note: Units with one terminal require the mount be grounded. Dimensions: 2X2X3.25

Probe fits pretapped hole in Marvel-Schebler and Bendix carburetors Designed and built in Wichita, Kansas, USA One year limited warranty Dimensi...

Swift CHT sender, 12mm dia. ring, 4ft metal shield wire. Similar to Falcon Gauge Made in China Dimensions: 1X4X4

Gasket type, 18mm, 700°F maximum. E.I. products include all documentation and certifications Dimensions: .75X5.5X8.5

JPI EDM option, oil press sender with harness.Dimensions: 2X2X3.5

Mitchell temperature sender 5/8 - 18 UNF Thread 250F degrees (FAA/PMA).Dimensions: .75X2.25X2.75

Capacitance fuel level sender 6", may be cut to 3", 1/4" OD, 12/24 vdc (28v max) input, 0-5 vdc output, non-bendable, 4 wires Made i...

JPI EDM-700/800/900 OAT PROBE For outside air temperature, with shield and extension lead 400510 Dimensions: 1X4X5

Swift Oil Temperature Sender 5/8" for Lycoming engines.Similar to Falcon Gauge Made in China

A603 Aviasport Fuel Pressure Sender 1/8" NPT threads

Flight data OAT probe for GT-50. Note: This is the OAT probe for the newer GT-50 G-Meter Gauge only.Dimensions: .25X5.5X8

ALCOR CLAMP 3-1/4 INCH EGT/TIT PROBE GROUNDED, .70 OHM, TYPE K

Temp sender 5/8 300F (FAA/PMA).Dimensions: 1.05X2.125X3

EIS Outside air temp probe

Superior to any other type of pyrometer available. Unlike com­pet­ing brands, these units are temperature com­pen­sat­ed. That is, wh...