Probes And Senders

JPI EDM-700/800/900 OAT PROBE For outside air temperature, with shield and extension lead 400510 Dimensions: 1X4X5

ALCOR CLAMP 3-1/4 INCH EGT/TIT PROBE GROUNDED, .70 OHM, TYPE K

Temp sender 5/8 300F (FAA/PMA).Dimensions: 1.05X2.125X3

Superior to any other type of pyrometer available. Unlike com­pet­ing brands, these units are temperature com­pen­sat­ed. That is, wh...

Note: These are priced and sold individually. EIS CHT probes, ring style and most commonly installs under spark plug. Sizes range from 4mm - 18mm

JPI EDM 900 Series P-3 MAP RPM Oil Press Harness 790422

Gauge Range: 15/30 PSI FAA-PMA # Terminals: 2 Notes: Units with one terminal require the mount be grounded. Units with two terminals require ...

RPM Sensor for BENDIX Series.

The Induction Air Temperature (IAT) probe, is installed just after after the inter-cooler. The probe is installed with a #40 stainless steel clamp...

Swift Oil Temperature Sender 1/8" Pipe Type. Similar to Falcon Gauge Made in China Dimensions: .5X2.5X3.5

Grand Rapids Technology OAT-003 for use with Grand Rapids EIS 2000, 4000, 6000.

The Turbine Inlet temperature (TIT) probe, Screw-in type with 7/16-20 thread.

Electrical sender (Probe) 3080-37 for cluster-type instrument. 5/8"-18, 10/32 Thread Resistance (Ohms) Note: Used 177-18 Thermistor curve...

Temperature Senders 1/8 NPT Thread Dimensions: .5X2X3

Skysports Metal Sleeve CHT ProbeDimensions: 1X4X4

Pressure Senders for oil & coolantRanges from 0-80 psi to 0-150 psi

Superior to any other type of pyrometer available. Unlike com­pet­ing brands, these units are temperature com­pen­sat­ed. That is, wh...

Gauge Range: 150 PSI # Terminals: 2 Note: Units with two terminals require one terminal be grounded.Dimensions: 2X2X3.25

VDO temperature probes - 1/8NPT water probe. Temperature Sender 250°F/120°C 1/8-27NPTF. Note: Bulk unit - Unit only. Instructions and packaging n...

Garmin Oil Pressure Sensor Assembly-150 PSIGDimensions: 4X4X6

10-00488 EGT Sender 1"-2.5" Clamp Type "K" type sending unit with 4-ft. lead. 10-00489 EGT Se...

Superior to any other type of pyrometer available. Unlike com­pet­ing brands, these units are temperature com­pen­sat­ed. That is, wh...

The Cylinder Head Temperature (CHT) - Tanis Adapter (Piggy Back) - probe, is installed in coalition with the Tanis Heating System. The CHT adapt...

0-100 psi pressure sender. 1/8" NPTF fitting.Dimensions: 3X3.25X4