Probes And Senders

Swift Pressure Sensors / transducers are designed and manufactured using the most advanced technologies. They have been used in many differen...

**Note: Cessna probe CHT S2334-3 (06-00703) must be used with the new rochester gauges. Cannot be used with old Stewart Warner gauges.Dimensions:...

10-00488 EGT Sender 1"-2.5" Clamp Type "K" type sending unit with 4-ft. lead. 10-00489 EGT Se...

Works well with plastic and other tank. Includes threaded attachment ring, gasket, and hardware. Standard 5-hole SAE pattern.

CDT and IAT probes only, no gauge.

Pressure Senders for oil & coolantRanges from 0-80 psi to 0-150 psi

Gasket type, 18mm, 700°F maximum. E.I. products include all documentation and certifications Dimensions: 3X.5X6

Silicone gasket used with Rochester 8341-3 Fuel Sender. Dimensions OD 2-13/16" | ID 1-1/2" | Thickness 3/32"Dimensions: .09X3X3

399S1 Temperature Sender 1/8 npt, 5/16" tip, 4" lead, 1,750 ohms @100F. Made in USADimensions: .5X2.275X4.125

Alcor 38091 Hardware Kit designed to provide the essentials while installing probes 86245, 86252, 86253, and 86255.

Rochester oil temperature gauges adapter nuts. 5/8-18UNF x 5/8-18 UNF.Dimensions: 1X1X1

Sender for 0 - 100 Oil Pressure Gauge, non-TSO.Dimensions: 2.5X2.5X3.5

The probe is constructed of concentric tubing (a small tube inside a larger tube). The tubes, which are separated by small insulators to keep the...

Probe type clamp "K". Designed for engines ROTAX 447/503/582, you don't need welding. Simply drill the holes and tighten the clamp. Protected ...

Rochester 3080-37 Gasket for Temp Probe. 5/8" ID | 7/8" OD

ALCOR EGT/TIT PROBE GROUNDED, .70 OHM, TYPE K 7/16 * All ring terminals and hardwareDimensions: .5X4X5

Insight is the world's largest manufacturer of aviation temperature probes. The temperature probe measures the engine's pulse and therefore is cru...

Uses a hose-style clamp to secure probe to exhaust stack. Large probe fits exhaust pipes from 1.5-2.5" diameter.Dimensions: .8X4.75X6

Gasket type, 18mm, 700°F maximum. E.I. products include all documentation and certifications Dimensions: .5X4X5

VDO Oil Pressure Sender 150 psi / 10 bar, thread 1/8-27 NPT. Warning Notice: VDO pressure senders are not to be used with any type o...

Replacement threaded adapter for bayonet style CHT probes.Dimensions: .375X.375X.75

Insight is the world's largest manufacturer of aviation temperature probes. The temperature probe measures the engine's pulse and therefore is cru...

Weld-on adapter for plyometer sender.Dimensions: .75X4X5

Dynon Avionics Skyview Oat Probe SV-OAT-340