Probes And Senders

Oil Temp Probe - For Lycoming and Continental engines for use with older GRT EIS models with software versions beginning with 44S--- or 66S---. Pl...

Superior to any other type of pyrometer available. Unlike com­pet­ing brands, these units are temperature com­pen­sat­ed. That is, wh...

ALCOR EGT/TIT PROBE GROUNDED, .80 OHM, TYPE K 7/16 * All ring terminals and hardware Dimensions: .5X2.5X6

The Fuel Pressure injected engine 5-32 psi, 1/8 NPT is mounted to the pressure line using a 6 inch flexible hose and fittings (not supplied). Y...

C223 CHT Sender 14mm. Imported From China.Dimensions: 1X4X4

Note: These are priced and sold individually. EIS CHT probes, ring style and most commonly installs under spark plug. Sizes range from 4mm - 18mm...

**Note: Cessna probe CHT S2334-3 (06-00703) must be used with the new rochester gauges. Cannot be used with old Stewart Warner gauges.Dimensions:...

Skysports Metal Sleeve CHT ProbeDimensions: 1X4X4

Secondary Oil Pressure. Includes PT-100GA pressure transducer. This cannot be used as a primary instrument, only secondary. The probes with cables...

Temperature Probe 3080-38 for cluster-type instrument. Probe comes with (2) nuts, (1) lockwasher and (1) copper mounting gasket in the included ...

1/8 NPT Oil temperature probe for JPI EDM systems. The OIL Temperature (OIL) probe is for all Lycoming and Continental direct drive engines and is...

RPM Sensor for Slick Mag. Slick 4000 or 6000.

Insight is the world's largest manufacturer of aviation temperature probes. The temperature probe measures the engine's pulse and therefore is cru...

Type J CHT probes 10-18mm spark plug ring. Made in the USA.Dimensions: 1X2.25X5.5

The simplest and most popular type of EGT probe. Uses a hose-style clamp to secure probe to exhaust stack. Small probe fits exhaust pipes from 1-2...

Temperature sender 1/4X28 THD, 1/4" tip, 4' lead, 1,750 ohms @ 100°F. Made in USADimensions: .73X2.3X4

Note: Photo for general reference only. Actual sender may differ in appearance. Swift Fuel capacity sender ...

Swift Pressure Sensors / transducers are designed and manufactured using the most advanced technologies. They have been used in many differen...

Current sensor, +/- 100 AMP. Suitable for aicraft with 60 amp alternators.Dimensions: 3X6X9

**Note: Cessna probe CHT S2334-3 (06-00703) must be used with the new rochester gauges. Cannot be used with old Stewart Warner gauges.Dimensions:...

10-00488 EGT Sender 1"-2.5" Clamp Type "K" type sending unit with 4-ft. lead. 10-00489 EGT Se...

Works well with plastic and other tank. Includes threaded attachment ring, gasket, and hardware. Standard 5-hole SAE pattern.

The probe is constructed of concentric tubing (a small tube inside a larger tube). The tubes, which are separated by small insulators to keep the...

Swift 10mm dia. ring, 4ft metal shield wire. Similar to Falcon Gauge Made in ChinaDimensions: .85X4X4