Probes And Senders

Alcor By Tempest Bayonet Style Probe CHT 3/8-24, Type K, screw-in probe and supersedes 86252-3. This unit is also a replacement for Garmin prob...

CS-02 Grand Rapid Hall Current Sensor +/- 50AMP

CDT and IAT probes only, no gauge.

Pressure Senders for oil & coolantRanges from 0-80 psi to 0-150 psi

Note: These are priced and sold individually. EIS CHT probes, ring style and most commonly installs under spark plug. Sizes range from 4mm - 18mm...

18mm dia. ring, 4ft metal shield wire. Similar to Falcon Gauge Made in China

These probes are similar to the EGT probes except they are fitted into the turbo inlet pipes (if so equipped) and also secured by a stainless stee...

Gasket type, 18mm, 700°F maximum. E.I. products include all documentation and certifications Dimensions: 3X.5X6

Silicone gasket used with Rochester 8341-3 Fuel Sender. Dimensions OD 2-13/16" | ID 1-1/2" | Thickness 3/32"Dimensions: .09X3X3

399S1 Temperature Sender 1/8 npt, 5/16" tip, 4" lead, 1,750 ohms @100F. Made in USADimensions: .5X2.275X4.125

Alcor By Tempest Bayonet Style CHT Thermocouple supersedes 86146. It is a AN5546-1 bayonet style probe. Alcor®, an affiliated company of Tempe...

Alcor 38091 Hardware Kit designed to provide the essentials while installing probes 86245, 86252, 86253, and 86255.

Rochester oil temperature gauges adapter nuts. 5/8-18UNF x 5/8-18 UNF.Dimensions: 1X1X1

Sender for 0 - 100 Oil Pressure Gauge, non-TSO.Dimensions: 2.5X2.5X3.5

The probe is constructed of concentric tubing (a small tube inside a larger tube). The tubes, which are separated by small insulators to keep the...

Probe type clamp "K". Designed for engines ROTAX 447/503/582, you don't need welding. Simply drill the holes and tighten the clamp. Protected ...

Rochester 3080-37 Gasket for Temp Probe. 5/8" ID | 7/8" OD

ALCOR EGT/TIT PROBE GROUNDED, .70 OHM, TYPE K 7/16 * All ring terminals and hardwareDimensions: .5X4X5

Insight is the world's largest manufacturer of aviation temperature probes. The temperature probe measures the engine's pulse and therefore is cru...

Swift Oil Temperature Sender 10 x 1.5mm for Rotax 912, 914. Similar to Falcon Gauge Made in China Di...

Uses a hose-style clamp to secure probe to exhaust stack. Large probe fits exhaust pipes from 1.5-2.5" diameter.Dimensions: .8X4.75X6

Gasket type, 18mm, 700°F maximum. E.I. products include all documentation and certifications Dimensions: .5X4X5

VDO Oil Pressure Sender 150 psi / 10 bar, thread 1/8-27 NPT. Warning Notice: VDO pressure senders are not to be used with any type o...

Replacement threaded adapter for bayonet style CHT probes.Dimensions: .375X.375X.75