Probes And Senders

Secondary TIT or Oil Temp probe. 1/8 NPT adjustable depth and 6 ft. cable. E.I. products include all documentation and certifications Dimensio...

Complete extension leads, with connector terminals, for extending CHT or EGT leads up to complete extension leads, with connector terminals, for e...

Type J CHT probes 10-18mm spark plug ring. Made in the USA.Dimensions: 1X2X5

ISS Fuel Sender RH 27-36" TankDimensions: 3X3.5X24.625

Garmin Oil Pressure Sensor Assembly-150 PSIGDimensions: 4X4X6

10-00488 EGT Sender 1"-2.5" Clamp Type "K" type sending unit with 4-ft. lead. 10-00489 EGT Se...

Probe for the measurement of the temperature of exhaust (EGT) for all ROTAX engines. It has a thread metric 8 and it can be installed directly on ...

Superior to any other type of pyrometer available. Unlike com­pet­ing brands, these units are temperature com­pen­sat­ed. That is, wh...

The Cylinder Head Temperature (CHT) - Tanis Adapter (Piggy Back) - probe, is installed in coalition with the Tanis Heating System. The CHT adapt...

0-100 psi pressure sender. 1/8" NPTF fitting.Dimensions: 3X3.25X4

Insight is the world's largest manufacturer of aviation temperature probes. The temperature probe measures the engine's pulse and therefo...

Probe PN 400509 is a complete assembly using type K thermocouple wire (red/yellow). The sensor port is a standard 5/8-18 thread for bot...

Alcor 98214 K Type Thermocouple Wire. 22 awg, 7/30 stranded insulated with FEP. Sold in 50 ft packs.

**Note: Cessna probe CHT S2334-3 (06-00703) must be used with the new rochester gauges. Cannot be used with old Stewart Warner gauges.Dimensions:...

This OAT probe is required to read outside air temperature (OAT). Though AERO 553-101-001 works fine without this, the OAT temperature display w...

Oil Press Sensor 1/4 NPT 0-150 PSI This sensor is mounted to the pressure line using a 6 inch flexible hose and fittings (not supplied)...

Hard tank fuel probe mount kit.Dimensions: 2X4X4

RPM Sensor for BENDIX Series.

The probe is constructed of concentric tubing (a small tube inside a larger tube). The tubes, which are separated by small insulators to keep the...

Swift Pressure Sensor / transducers are designed and manufactured using the most advanced technologies. They have been used in many different...

Secondary TIT or Oil Temp probe, 7/16-20 thread adjustable depth and 6ft cable.Dimensions: 1.125X5.5X8

Temperature Senders 1/8 NPT Thread Dimensions: .5X3X5

Since Bayonet CHTs are made with short length leads, extending them is often necessary. CHTs and EGTs should be extended with type-K extension w...

ISS carb fuel pressure sender, 16PSI, Non-TSO.Dimensions: 2X2X3