Probes And Senders
Filters
ISS Fuel Level Sender Right Tank 27-36 33-240 OHM NON TSO
ISS Fuel Sender RH 27-36" TankDimensions: 3X3.5X24.625
Garmin OIL Pressure Sensor Assembly - 150 Psig
Garmin Oil Pressure Sensor Assembly-150 PSIGDimensions: 4X4X6
Swift EGT Precision Bayonet Type Probe
10-00488 EGT Sender 1"-2.5" Clamp Type "K" type sending unit with 4-ft. lead. 10-00489 EGT Se...
View full detailsIM-928 EGT Type K Sensor 9FT
Probe for the measurement of the temperature of exhaust (EGT) for all ROTAX engines. It has a thread metric 8 and it can be installed directly on ...
View full detailsEGT Probe Rotax Factory B HEW
Superior to any other type of pyrometer available. Unlike competing brands, these units are temperature compensated. That is, wh...
View full detailsJPI EDM Option CHT MM-113-3/8 Adapter Probe Gasket Type
The Cylinder Head Temperature (CHT) - Tanis Adapter (Piggy Back) - probe, is installed in coalition with the Tanis Heating System. The CHT adapt...
View full details1/8 100 PSI Pressure Sender
0-100 psi pressure sender. 1/8" NPTF fitting.Dimensions: 3X3.25X4
Insight OAT Probe TIP 1200-021
Insight is the world's largest manufacturer of aviation temperature probes. The temperature probe measures the engine's pulse and therefo...
View full detailsJPI OIL Temp Probe 400509 5/8-18
Probe PN 400509 is a complete assembly using type K thermocouple wire (red/yellow). The sensor port is a standard 5/8-18 thread for bot...
View full detailsAlcor 98214 Type K Wire (50 FT)
Alcor 98214 K Type Thermocouple Wire. 22 awg, 7/30 stranded insulated with FEP. Sold in 50 ft packs.
Thermo. Bayonet Type AN5541-1
**Note: Cessna probe CHT S2334-3 (06-00703) must be used with the new rochester gauges. Cannot be used with old Stewart Warner gauges.Dimensions:...
View full detailsJPI EDM Option OIL Press Sender 1/4NPT 0-150PSI 3060-18
Oil Press Sensor 1/4 NPT 0-150 PSI This sensor is mounted to the pressure line using a 6 inch flexible hose and fittings (not supplied)...
View full detailsJPI Standard RPM Vent Plug Sensor FOR Bendix
RPM Sensor for BENDIX Series.
Fuel Probe 12V 12IN 3BND 0-5V
The probe is constructed of concentric tubing (a small tube inside a larger tube). The tubes, which are separated by small insulators to keep the...
View full detailsSwift OIL Press Trans 0-150 PSI 10 BAR 0.5-4.5V
Swift Pressure Sensor / transducers are designed and manufactured using the most advanced technologies. They have been used in many different...
View full detailsEI FP Option TIT OR OIL Temp Probe 7/16-20 Thread 6 Cable
Secondary TIT or Oil Temp probe, 7/16-20 thread adjustable depth and 6ft cable.Dimensions: 1.125X5.5X8
Mitchell Temp Sender 1/8 250F
Temperature Senders 1/8 NPT Thread Dimensions: .5X3X5
ISS Carb Fuel Press Sender 16PSI NON TSO
ISS carb fuel pressure sender, 16PSI, Non-TSO.Dimensions: 2X2X3
EI P-100 CHT Replacement Probe Screw IN Type
For reliability and durability reasons, E.I. will only manufacture ungrounded EGT probes. Ground noise at the engine can be a big problem...
View full detailsSwift EGT Clamp 20 Type Probe 1/2 TIP 48
10-00488 EGT Sender 1"-2.5" Clamp Type "K" type sending unit with 4-ft. lead. 10-00489 EGT Se...
View full detailsEI Option Secondary TIT OR OIL Temp 1/8 NPT 6 Cable
1/8 NPT with adjustable depth. (with cable)
ISS OIL Temp Sender 240 Degree NON TSO
ISS Oil Temperature Sender with 240° - Non-TSO 3/8 diameter 1/8 NPT thread Dimensions: .5X.5X2
Datcon OIL Temp Sender 1/8 NPT
Single-station senders for water and oil temperature gauges. Range: 100-280°F & 140-320°F Thread: 1/8-27 NPTFDimensions: .5X.5X2
86160 Alcor EGT Probe Type K
Alcor EGT/TIT Probe Grounded, .70 OHM, Type K 7/16. PMA/FAA approved.Dimensions: 1X2X7